OPHIR 2 Sets Portable Airbrush Spray Booth Kit with 6 LED Lights & 2 Exhaust Hoses - Perfect for Model Painting, Craft Projects, Nail Art, Cake Decorating & T-Shirt Design | Indoor Hobby & Professional Use

This is an excellent spray booth “if” you are patient during the install. The first pic illustrates the gap that is created when installing the two booths together and the proper configuration of the side panels doubling as a base (its the white plastic that is configured in a diamond pattern after install). I used a piece of duct tape to fill the gap so as not to have overspray get on my table surface. Second pic points to three zip ties i installed on the top center of the combined booths to provide some horizontal support. Third pic points to the back corner of the booth, and the point where when installing the LED light bracket you need to place one hand on the backside of the booth and use your other hand somewhat forcefully push the bracket into the receptacle. If you don’t use a two handed approach you probably wont get the LED bracket to seat right/it wont work. This is the only tricky spot for most people. Last pic shows my less than elegant, yet highly effective exhaust system solution. I used one of the two flexible hoses provided. I cut the hose into 3 parts. Next, i used HVAC tape and a 4” plastic landscape “T” joint to combine the three hose pieces together. Lastly, i bought a bucket with a sealed lid. Next, i filled the bucket with 4” of water, cut a hole in the sealed lid and taped it all together. Now i am able to paint as much as i want without having to plumb the exhaust tubing out a window. All the paint fumes and particulate blows into the water at the bottom of the bucket. Works like a charm. Kills the smells, too. This is a great solution for folks in an apartment setting or that have no access to outside air. Happy spraying.